What Is Genuine Leather? (And What Isn’t?)

In Article9 Minutes

Month: August 2021

You would think it was a simple question: What is genuine leather? But if you Google that query you will come up with a whole range of definitions – and a lot of them are completely wrong. The problem isn’t simply a question of whether genuine means ‘real’ or ‘synthetic’, but that people confuse the term with ways of grading leather. Not to mention the confusion caused by people using the term ‘leather’ to include faux leathers (it really is time for leather to have protected status in law). This article is an attempt to set the record straight once and for all.

Genuine leather – definition 

The International Council of Tanners defines leather as:

“The hide or skin of an animal with its original fibrous structure more or less intact, tanned to be imputrescible. The hair or wool may, or may not, have been removed. Leather is also made from a hide or skin which has been split into layers or segmented either before or after tanning. However, if the tanned hide or skin is disintegrated mechanically and/or chemically into fibrous particles, small pieces or powders and then, with or without the combination of a binding agent, is made into sheets or other forms, such sheets or forms are not leather. If the leather has a surface coating, this surface layer, however applied, must not be thicker than 0.15mm.”

It also defines ‘coated leather’ and ‘bonded leather’:

Coated leather is leather where the surface coating applied to the leather does not exceed one third of the total thickness of the product but is in excess of 0.15mm.”

“Materials where the leather fibres have been disintegrated and then reconstituted are not leather, but can be called bonded leather fibre or leather fibre board, if the leather fibre makes up more than 50% of the material. If there is any other component apart from leather fibre, binding material and leather auxiliaries, then this should be declared as part of the description.”

‘Genuine leather’ is not a ‘grade’. Genuine just means ‘real’.

Some definitions found on the internet are completely incorrect. For instance, the term ‘genuine leather’ DOES NOT describe the ‘grain’ or the ‘quality’ of a leather. As we can see from the definition above, the term refers solely to the authenticity of the material in question. Mike Batson from North Star Leather has written extensively about the “myth” of “genuine” being taken as a grade of leather. His definition of ‘genuine leather’ could not be clearer: “Simply put, it just means ‘real’ – a distinguisher from ‘synthetic’.

Batson theorises that misinformation like this came about because in the past, ‘genuine leather’ was stamped on all kinds of leather goods – including the highest quality ones. But many manufacturers found that as long as they used a base layer of cheap leather they could pass off products with a polyurethane top layer as ‘genuine leather’. Over time, people caught on to this sleight of hand and began to associate the ‘genuine leather’ tag as a sign that they were being taken for a ride.

In reality, ‘genuine’ just means ‘real’. In an article that debunks the genuine myth, Batson defines the term in a way we can all understand: “It’s very similar to using the word ‘wood’ when talking about furniture: the vast majority of ‘wood furniture’ you can buy today is particle board, but that doesn’t mean all ‘wood’ furniture is particle board or low quality. It can be applied to everything from cheap particle board, to plywood, to high-end exotics.”

The hide or skin of an animal with its original fibrous structure more or less intact, tanned to be imputrescible.

Types of leather: the definitive story

‘Top grain leather’ refers to one which includes the outermost layer of the hide – or the ‘grain’. It can come in a variety of thicknesses and may include the fibrous ‘corium’ layer of the hide which is made of collagen.

If the grain is left completely intact we refer to it as ‘full grain leather’. Good quality genuine leather belts are good examples. But if the surface of the top grain leather has been ‘finished’ in some way, for example, having blemishes sanded away, dyes added or embossing done, we call it ‘corrected grain leather’. One particular type of corrected grain leather is ‘nubuck’, which is created by buffing the grain to reveal the hide’s fibres, which give a velvety ‘nap’ to the leather.

During the tanning process, most hides are ‘split’ which means the top grain layer is removed leaving a bottom layer which can be used to make ‘split’ or ‘suede leather. This stage also determines the thickness of the grain layer. Different applications – such as shoes or seat covers – require different thicknesses of leather.

Automotive leather

Leather remains a popular choice for vehicle interiors given its visual and tactile appeal as well as its durability. According to The Leather Dictionary, the first car seat covers used vegetable tanned leather “without surface colouration but made water repellent with oils and fats – just like saddles”.

In the past, aniline leather was used which is dyed to give a rich colour but lacks any protective coating so it can be very vulnerable to damage. According to Textile Value Chain, semi-aniline leather is used for higher end car leather and is “a trade-off between keeping the finish as natural as possible and lending it some versatility by giving a thin protective coating”, which means the end product feels very supple. Today, pigmented (coated/protected) leather is the most commonly used type in the automotive sector. This features a finish that goes over the leather to protect and pigment it. This can still result in ‘high quality’ leather if the finish is very thin.

References and sources used:

‘Leather’ entry on Wikipedia Accessed 27-04-2021

United Nations Industrial Development Organisation

Federico Brugnoli, Ivan Kráľ: ‘Life Cycle Assessment, Carbon Footprint in Leather Processing (UNIDO)’ Accessed 28-04-2021

North Star Leather

Mike Batson: ‘The “Grades of Leather” hierarchy you’ve probably read about is a Myth’ Accessed 27-04-2021

Mike Batson: ‘“Genuine Leather” has become a 4-letter word’ Accessed 28-04-2021

‘Car Leather’ entry on Leather Dictionary.com Accessed 28-04-2021

Article: ‘How To Clean Leather Seats: The Ultimate Guide (Washos)’ Accessed 28-04-2021

Article: ‘Types Of Leather Used In Automotive’ Accessed 27-04-2021

Dennis Green: ‘Why everything you thought you knew about buying quality leather is wrong’ Accessed 27-04-2021

Article: ‘4 Basic Types of Leather, An Overview Guide to Leather Qualities’ Accessed 28-04-2021

How is Leather Made? PDF fact sheet

Subscribe to our newsletter

    Your e-mail is only used exclusively for our newsletter and will not be shared with third parties.


    One 4 Leather Consulted On Auto Express Vegan Car Article

    In Article3 Minutes

    Month: August 2021

    When Auto Express journalist Graham Hope wanted to write an article about how veganism and sustainability are shaping the latest car models, he turned to the experts for the facts. In addition to contacting all the big car manufacturers, Hope reached out to One 4 Leather to get the lowdown on why the rush for carmakers to go vegan might not be the answer they would like it to be. The article gave us the chance to put forward the case for leather in car interiors but, it also highlights some of the anomalies in the whole ‘vegan car’ proposition.

    It seems everyone, from Audi to Volvo, are finding ways to respond to the vegan movement. This interesting and balanced article lists the various routes manufacturers have taken. On the whole, leather options are still offered alongside the alternatives, in recognition that many – if not most – people recognise the time-proven benefits of using leather in cars. Durability, comfort, aesthetics, fire retardancy, stain resistance, colour fastness and crack resistance are just some properties that come immediately to mind – as well, of course, as sustainability and minimal environmental impact.

    The alternatives cover a wide range of materials. As we have reported before, many of these fail to match leather’s all-round, total lifetime performance. Most options labelled as ‘vegan leather’ or ‘synthetic leather’ are actually petroleum-based and better referred to as ‘plastic’. Polyvinyl Chloride, commonly known as PVC, or polyurethane (PU), are the most common forms of ‘vegan leather’. Unlike biodegradable leather, plastics can take thousands of years to break down while causing untold harm to wildlife, particularly marine animals. Similarly, alternatives that use microfibres to mimic the feel of suede also come with downsides. Microfibre materials (made of polyester fibres) are often associated with microplastic pollution, are highly flammable and release toxic fumes when incinerated.

    Most options labelled as ‘vegan leather’ or ‘synthetic leather’ are actually petroleum-based and better referred to as ‘plastic’

    Of course, people are free to make their own choices, but as the article points out, “the information available isn’t always particularly transparent”. It appears many people – and this especially includes non-vegans – are now enquiring about alternatives to leather in the belief that they are choosing a more ‘sustainable’ option. Manufacturers, too, are said to be looking “strongly at suppliers’ credentials when it comes to sustainability”. The irony is that genuine leather, a by-product of the meat industry and, by definition, 100% natural and biodegradable, is likely far more ‘sustainable’ than alternatives that will pose a much greater threat to the environment in the long run.

    Read the full article here.

    Subscribe to our newsletter

      Your e-mail is only used exclusively for our newsletter and will not be shared with third parties.


      What Is Genuine Leather? (And What Isn’t?)

      In Article9 Minutes

      Month: August 2021

      You would think it was a simple question: What is genuine leather? But if you Google that query you will come up with a whole range of definitions – and a lot of them are completely wrong. The problem isn’t simply a question of whether genuine means ‘real’ or ‘synthetic’, but that people confuse the term with ways of grading leather. Not to mention the confusion caused by people using the term ‘leather’ to include faux leathers (it really is time for leather to have protected status in law). This article is an attempt to set the record straight once and for all.

      Genuine leather – definition 

      The International Council of Tanners defines leather as:

      “The hide or skin of an animal with its original fibrous structure more or less intact, tanned to be imputrescible. The hair or wool may, or may not, have been removed. Leather is also made from a hide or skin which has been split into layers or segmented either before or after tanning. However, if the tanned hide or skin is disintegrated mechanically and/or chemically into fibrous particles, small pieces or powders and then, with or without the combination of a binding agent, is made into sheets or other forms, such sheets or forms are not leather. If the leather has a surface coating, this surface layer, however applied, must not be thicker than 0.15mm.”

      It also defines ‘coated leather’ and ‘bonded leather’:

      Coated leather is leather where the surface coating applied to the leather does not exceed one third of the total thickness of the product but is in excess of 0.15mm.”

      “Materials where the leather fibres have been disintegrated and then reconstituted are not leather, but can be called bonded leather fibre or leather fibre board, if the leather fibre makes up more than 50% of the material. If there is any other component apart from leather fibre, binding material and leather auxiliaries, then this should be declared as part of the description.”

      ‘Genuine leather’ is not a ‘grade’. Genuine just means ‘real’.

      Some definitions found on the internet are completely incorrect. For instance, the term ‘genuine leather’ DOES NOT describe the ‘grain’ or the ‘quality’ of a leather. As we can see from the definition above, the term refers solely to the authenticity of the material in question. Mike Batson from North Star Leather has written extensively about the “myth” of “genuine” being taken as a grade of leather. His definition of ‘genuine leather’ could not be clearer: “Simply put, it just means ‘real’ – a distinguisher from ‘synthetic’.

      Batson theorises that misinformation like this came about because in the past, ‘genuine leather’ was stamped on all kinds of leather goods – including the highest quality ones. But many manufacturers found that as long as they used a base layer of cheap leather they could pass off products with a polyurethane top layer as ‘genuine leather’. Over time, people caught on to this sleight of hand and began to associate the ‘genuine leather’ tag as a sign that they were being taken for a ride.

      In reality, ‘genuine’ just means ‘real’. In an article that debunks the genuine myth, Batson defines the term in a way we can all understand: “It’s very similar to using the word ‘wood’ when talking about furniture: the vast majority of ‘wood furniture’ you can buy today is particle board, but that doesn’t mean all ‘wood’ furniture is particle board or low quality. It can be applied to everything from cheap particle board, to plywood, to high-end exotics.”

      The hide or skin of an animal with its original fibrous structure more or less intact, tanned to be imputrescible.

      Types of leather: the definitive story

      ‘Top grain leather’ refers to one which includes the outermost layer of the hide – or the ‘grain’. It can come in a variety of thicknesses and may include the fibrous ‘corium’ layer of the hide which is made of collagen.

      If the grain is left completely intact we refer to it as ‘full grain leather’. Good quality genuine leather belts are good examples. But if the surface of the top grain leather has been ‘finished’ in some way, for example, having blemishes sanded away, dyes added or embossing done, we call it ‘corrected grain leather’. One particular type of corrected grain leather is ‘nubuck’, which is created by buffing the grain to reveal the hide’s fibres, which give a velvety ‘nap’ to the leather.

      During the tanning process, most hides are ‘split’ which means the top grain layer is removed leaving a bottom layer which can be used to make ‘split’ or ‘suede leather. This stage also determines the thickness of the grain layer. Different applications – such as shoes or seat covers – require different thicknesses of leather.

      Automotive leather

      Leather remains a popular choice for vehicle interiors given its visual and tactile appeal as well as its durability. According to The Leather Dictionary, the first car seat covers used vegetable tanned leather “without surface colouration but made water repellent with oils and fats – just like saddles”. You can find out how automotive leather is made today in this handy infographic.

      In the past, aniline leather was used which is dyed to give a rich colour but lacks any protective coating so it can be very vulnerable to damage. According to Textile Value Chain, semi-aniline leather is used for higher end car leather and is “a trade-off between keeping the finish as natural as possible and lending it some versatility by giving a thin protective coating”, which means the end product feels very supple. Today, pigmented (coated/protected) leather is the most commonly used type in the automotive sector. This features a finish that goes over the leather to protect and pigment it. This can still result in ‘high quality’ leather if the finish is very thin.

      References and sources used:

      ‘Leather’ entry on Wikipedia Accessed 27-04-2021

      United Nations Industrial Development Organisation

      Federico Brugnoli, Ivan Kráľ: ‘Life Cycle Assessment, Carbon Footprint in Leather Processing (UNIDO)’ Accessed 28-04-2021

      North Star Leather

      Mike Batson: ‘The “Grades of Leather” hierarchy you’ve probably read about is a Myth’ Accessed 27-04-2021

      Mike Batson: ‘“Genuine Leather” has become a 4-letter word’ Accessed 28-04-2021

      ‘Car Leather’ entry on Leather Dictionary.com Accessed 28-04-2021

      Article: ‘How To Clean Leather Seats: The Ultimate Guide (Washos)’ Accessed 28-04-2021

      Article: ‘Types Of Leather Used In Automotive’ Accessed 27-04-2021

      Dennis Green: ‘Why everything you thought you knew about buying quality leather is wrong’ Accessed 27-04-2021

      Article: ‘4 Basic Types of Leather, An Overview Guide to Leather Qualities’ Accessed 28-04-2021

      How is Leather Made? PDF fact sheet

      Subscribe to our newsletter

        Your e-mail is only used exclusively for our newsletter and will not be shared with third parties.